Nano Diamond Coated Drawing Dies
We always try to make products that you can trust and use.
Introduction:
Nano Die is a newly developed product using the CVD method. Nano die has excellent smoothness and thermal resistance unique to natural diamond (ND), as well as excellent wear resistance in polycrystalline diamond (PCD). In addition, they form a relatively low price point, so they can be the best choice if you want a good quality die at an affordable price.
Advantages:
1. Long Service Life
On average, it can be used more than 20 to 30 times longer than hard metal dies.
* It can last up to 50 times longer depending on the product and work environment.
2. High Precision
Because of its low coefficient of friction, high wire surface finish, and non-stick material, the finished product is stable in size and high quality can be maintained consistently.
3.Reduction in Raw Materials
When using nano dies, the length of the wire produced is 1% to 2% longer than that produced by other dies.
4. Reduction in Production Costs
Thanks to its strong durability and long service life, it has absolute cost savings for die replacement and repair.
Thanks to its long service life, which is inversely proportional to its reasonable price, higher performance can be expected at a low cost in the long run.
5. High Quality with Low Price
We provide high-quality products recognized by leading companies not only in Korea but also in the world.
We offer products at the lowest price in the industry.
The Structure of dies and the name of each part
Entrance: It ensures smooth supply of drawing oils and maintains the center of the incoming material.
Approach: It plays a role in inducing the incoming material to enter smoothly.
Reduction: The lead-in material is reduced, and at the same time, it serves to reduce the pull-in frictional force and disperse the pressure.
Bearing: It determines the final size of the product.
Back Relief: It minimizes damage and irritation to the product.
Exit: This is the exit for the final product.
Applications
Wire Products
Electrical Wire and Cable Products
Pipe and tube
Stranded wire, welding wire, wire rope,
enameled wire, spring wire, saw wire, etc
Polycrystalline Diamond Drawing Dies
We always try to make products that you can trust and use.
Introduction:
Polycrystalline diamond (PCD) is a type of artificially sintered diamond that can be used in both wet drawing and dry drawing processes. Polycrystalline diamond die has the longest die life of all materials, providing the highest production efficiency and reducing downtime. It is also suitable for all applications, from large to ultra-fine drawing
Advantages:
1. Long Service Life
On average, it can be used more than 20 to 30 times longer than hard metal dies.
* It can last up to 50 times longer depending on the product and work environment.
2. High Precision
Because of its low coefficient of friction, high wire surface finish, and non-stick material, the finished product is stable in size and high quality can be maintained consistently.
3. Low Breakage Rate
It has high density, hardness and strength, so the breakage rate is low.
4. High Quality with Low Price
We provide high-quality products recognized by leading companies not only in Korea but also in the world.
We offer products and repair services at the lowest price in the industry.
The Structure of dies and the name of each part
Entrance: It ensures smooth supply of drawing oils and maintains the center of the incoming material.
Approach: It plays a role in inducing the incoming material to enter smoothly.
Reduction: The lead-in material is reduced, and at the same time, it serves to reduce the pull-in frictional force and disperse the pressure.
Bearing: It determines the final size of the product.
Back Relief: It minimizes damage and irritation to the product.
Exit: This is the exit for the final product.
Applications
Wire Products
Electrical Wire and Cable Products
Pipe and tube
Stranded wire, welding wire, wire rope,
enameled wire, spring wire, saw wire, etc
Tungsten Carbide Drawing Dies
We always try to make products that you can trust and use.
Introduction:
Tungsten Carbide die has long been used in the steel industry as well as applications such as tying or stranding large-diameter cables thanks to its excellent corrosion resistance and impact resistance. It is especially suitable for short-term applications due to their low cost.
Advantages:
1. Low Cost
The cost is relatively low, so the burden of replacement and repair is low.
It is suitable for wire machining with a very high hardness and a short die replacement cycle.
2. Powerful Characteristics
Excellent thermal conductivity.
Excellent corrosion resistance and impact resistance.
Excellent impact resistance.
3. High Quality with Low Price
We provide high-quality products recognized by leading companies not only in Korea but also in the world.
We offer products at the lowest price in the industry.
The Structure of dies and the name of each part
Entrance: It ensures smooth supply of drawing oils and maintains the center of the incoming material.
Approach: It plays a role in inducing the incoming material to enter smoothly.
Reduction: The lead-in material is reduced, and at the same time, it serves to reduce the pull-in frictional force and disperse the pressure.
Bearing: It determines the final size of the product.
Back Relief: It minimizes damage and irritation to the product.
Exit: This is the exit for the final product.
Applications
Wire Products
Electrical Wire and Cable Products
Pipe and tube
Stranded wire, welding wire, wire rope,
enameled wire, spring wire, saw wire, etc
Natural Diamond/Synthetic Single Crystal Diamond Drawing Dies
We always try to make products that you can trust and use.
Introduction:
Natural diamond (ND) has the best surface finish of all materials. High hardness and wear resistance ensure the life of the die. It has the highest thermal conductivity of all materials.
Synthetic single crystal diamond (SSCD) are a type of synthetic diamond with high purity, no impurities, and high stability. Synthetic single crystal diamond has very similar physical properties to natural diamond (ND), so it can be used in any case where natural diamond die is available.
Advantages:
1. Long Service Life
It can be used for a long time thanks to its high hardness and excellent wear resistance.
2. High Precision and Uniform Texture
It is mainly used for fine and fine wire operations thanks to its excellent surface finish.
3. High Quality with Low Price
We provide high-quality products recognized by leading companies not only in Korea but also in the world.
We offer products at the lowest price in the industry.
The Structure of dies and the name of each part
Entrance: It ensures smooth supply of drawing oils and maintains the center of the incoming material.
Approach: It plays a role in inducing the incoming material to enter smoothly.
Reduction: The lead-in material is reduced, and at the same time, it serves to reduce the pull-in frictional force and disperse the pressure.
Bearing: It determines the final size of the product.
Back Relief: It minimizes damage and irritation to the product.
Exit: This is the exit for the final product.
Applications
Fine and Super Fine Wire Products
Medical Wire, EDM Wire, etc
Shape Dies
We always try to make products that you can trust and use.
Introduction:
Polycrystalline diamond (PCD) shape die is a type of artificially sintered diamond that can be used in both wet drawing and dry drawing processes. Polycrystalline diamond die has the longest die life of all materials, providing the highest production efficiency and reducing downtime. It is also suitable for all applications, from large to ultra-fine drawing
Advantages:
1. Long Service Life
On average, it can be used more than 20 to 30 times longer than hard metal dies.
* It can last up to 50 times longer depending on the product and work environment.
2. High Precision
Because of its low coefficient of friction, high wire surface finish, and non-stick material, the finished product is stable in size and high quality can be maintained consistently.
3. Low Breakage Rate
It has high density, hardness and strength, so the breakage rate is low.
4. High Quality with Low Price
We provide high-quality products recognized by leading companies not only in Korea but also in the world.
We offer products and repair services at the lowest price in the industry.
5. Make-to-order
Customers can customize the shape.
Login with Naver ID 
Login with Kakao ID 
Login with Google ID